PU Matcoat (PU 805 E)
- Used as a transparent surface layer for decorative floor systems that need to retain their attractive appearance.
- Highly adhesive.
- Can be applied to epoxy/polyurethane systems.
- Based on new environment-friendly technology.
- The final result is attractive, understated, matt and highly elegant.
- Hardens by physical and chemical cross-linking to form a solid film.
- The product creates a final layer, which is rigid, abrasive, UV stable and easy to clean.
- Beware: not resistant to most rubbers (castors, tyres…). It can leave brownish marks.
Technical specifications
| Processing: | - Mix components A and B (these components are pre-dosed). - Stir component A (the resin) thoroughly before emptying the packaging contents into a clean mixing bucket. - Add component B (the hardener) to component A (the resin), then combine using a slow rotation mixer (200-400 rpm) for at least 2-3 minutes until you obtain a homogenous mixture. - Pour this homogenous mixture (through a sieve, if necessary) into a clean bucket and mix it again. - Leave the mixture to rest for 10 minutes, before mixing it again and beginning to apply the product. - PU Matcoat A+B (PU 805 E) should be applied with a microfiber roller, using regular, criss-crossing movements. It is important to use the indicated quantity at all times. - A seamless finish can be obtained, provided you always apply the product wet on wet. - After a certain time, use a new roller. |
| Consumption: | +/- 0,15 kg/m²/layer (optimal 2 layers) |
| Colors: | White, transparent after hardening |
| Packaging: | 5 kg |
| Dosage: | In weight = A : B = 100 : 13,6 In volume = A : B = 100 : 12,4 |
Realisations with this product